How to Manually Lower Sleep Number Bed

Are you tired of sleeping on a mattress that is either too soft or too firm? A Sleep Number bed can be the perfect solution for you. It offers personalized comfort and adjusts to your preferred level of support, making it ideal for different types of sleepers.

Adjusting your Sleep Number bed manually can seem daunting at first, but it’s a straightforward process that can greatly enhance your sleeping experience. Whether you’re dealing with a temporary power outage or prefer a hands-on approach, learning to adjust your bed’s firmness manually ensures that you continue enjoying personalized comfort.

This guide on how to manually lower sleep number bed is designed to walk you through the steps needed to manually lower your bed, ensuring a perfect night’s sleep tailored to your specific preferences.

What Will You Need?

To manually lower your Sleep Number bed, you will need the following items:

• The remote control that came with your bed
• A flathead screwdriver or a coin
• A flashlight (if adjusting in low light conditions)

With these items, you can easily adjust the firmness of your Sleep Number bed to your desired level.

10 Easy Steps on How to Manually Lower Sleep Number Bed

Step 1. Locate the Mattress Firmness Control System:

Begin by finding the mattress firmness control system, which is usually situated on either side of the Sleep Number bed. Sometimes, it may be concealed under the bed or within a compartment on the side of the bed frame. Use the flashlight if you are working in low light conditions to help locate the system.

Step 2. Remove the Locking Cap:

Gently insert a flathead screwdriver or the edge of a coin into the small slot on the locking cap. The locking cap is typically found on the mattress firmness control system, securing the air chamber connections. The cap should come loose with a slight twist, allowing you to remove it. Ensure to keep the cap safe, as you must reattach it after adjusting your mattress’s firmness.

Step 3. Disconnect the Air Hose From the Firmness Control System:

Carefully disconnect the air hose from the firmness control system by pressing down on the surrounding gray tab while gently pulling the hose away. The gray tab is a locking mechanism, ensuring the air hose remains securely attached during normal operation. By pressing it down, you can release the hose without damage. It’s crucial to perform this step with care to avoid any accidental disconnections or damage to the air hose, as this could affect the functionality of your Sleep Number bed. Once the hose is disconnected, you will be able to manually lower the firmness of your bed.

Step 4. Lower the Firmness of Your Bed:

Once the air hose is disconnected, the next step is to manually lower the firmness of your Sleep Number bed. To do this, gently squeeze the valve at the end of the air hose you’ve just disconnected. This will allow air to escape from the air chamber. Continue squeezing the valve until you have reached your desired level of firmness.

If you’re unsure of your preferred Sleep Number setting, it’s a good idea to start by lowering the firmness a bit at a time and then lying on the bed to test the firmness level. Adjust gradually until you find the perfect balance of comfort and support. Remember, it’s easier to release air and lower the firmness than to add air back into the chamber, so proceed carefully.

Step 5. Reconnect the Air Hose:

After you have adjusted the firmness of your Sleep Number bed to your satisfaction, it’s time to reconnect the air hose to the firmness control system. To do this, align the end of the air hose with the connection point on the firmness control system. Firmly press the hose onto the connector until it snaps into place, indicating a secure connection. Ensure that the gray locking tab is properly engaged to prevent any air leaks. Reconnecting the air hose correctly is essential for maintaining the desired firmness level and ensuring the longevity of your Sleep Number bed.

Step 6. Test the Firmness:

After successfully reconnecting the air hose, it’s important to test the firmness of your Sleep Number bed to ensure it matches your desired comfort level. Lie down on the bed and feel for any areas needing further adjustment. If the bed feels too firm or too soft, repeat the disconnection and firmness adjustment process as needed. Finding the perfect Sleep Number setting might take a few tries, but the effort is worth the personalized comfort you’ll achieve.

Step 7. Replace the Locking Cap:

Once you are satisfied with the firmness of your bed, it’s time to secure everything back in place. Retrieve the locking cap you set aside in Step 2 and position it over the connection on the mattress firmness control system where the air hose is now securely reattached. Press the cap down until it clicks into place, indicating it is locked. This step ensures that the hose remains connected, stabilizing the air chamber’s pressure and, thus, maintaining your chosen firmness level. It’s crucial to ensure that the locking cap is securely fastened to prevent any air from escaping over time, which would alter the comfort of your Sleep Number bed.

Step 8. Clean Up

Now that the firmness of your Sleep Number bed has been successfully adjusted, it’s time to tidy up your workspace. Carefully collect any tools you used during the process, such as the screwdriver or coin, and return them to their appropriate places. If you use a flashlight, turn it off and store it away. Ensure the area around your bed is clear and free of any obstacles that might interfere with your bed’s operation or movement around it. Cleaning up ensures safety and helps maintain the aesthetics and functionality of your Sleep Number bed and your bedroom.

Step 9. Enjoy Your Customized Comfort:

Congratulations! You have successfully adjusted the firmness of your Sleep Number bed. Now, it’s time to experience the personalized comfort you’ve created. Whether you prefer a softer surface for a plush sleeping experience or a firmer base for more support, your Sleep Number bed is now perfectly tailored to your individual preference. Enjoy a good night’s sleep, and remember, you can always repeat these steps to fine-tune your bed’s firmness as your comfort needs evolve.

Step 10. Maintenance Tips:

Regular maintenance is key to ensuring your Sleep Number bed continues providing optimal comfort and support. Check the connections periodically to ensure they are tight, and the locking cap is securely fastened to prevent any air leaks. It’s also advisable to clean the mattress surface with a soft, damp cloth and mild detergent to remove any dust or stains. Avoid using harsh chemicals that can damage the material. Additionally, consider rotating your mattress every six months to promote even wear and extend its lifespan. By following these simple maintenance tips, you can enjoy the customized comfort of your Sleep Number bed for years to come.

By following these steps, you can confidently adjust the firmness of your Sleep Number bed as needed, ensuring a comfortable and restful night’s sleep.

5 Additional Tips and Tricks

1. Listen for Air Movement: When manually lowering the firmness of your Sleep Number bed by squeezing the valve, listen closely to the air escaping. This sound is a good indicator of air movement, and by paying attention, you can better control the rate at which the firmness decreases.
2. Utilize a Pillow While Adjusting: For a more accurate feel of the firmness level while making adjustments, use a pillow. By resting your head on a pillow as you would when sleeping, you can better gauge the mattress’s comfort level and make more precise adjustments.
3. Consider Bed Temperature: Remember that the firmness of your Sleep Number bed can feel different based on room temperature. The bed may feel firmer in colder environments, while in warmer settings, it might feel softer. Adjust your bed accordingly and consider making slight modifications as the seasons change.
4. Note Your Ideal Settings: Once you find the perfect Sleep Number setting, make a note of it. Keeping a record of your ideal firmness level can save time in the future, especially if the settings are accidentally changed or if you need to deflate the bed to move.
5. Regularly Check for Leaks: To maintain your desired firmness level, periodically check the air hose connections for leaks. Even a small leak can significantly alter the comfort level of your Sleep Number bed. If you notice a gradual loss of firmness, inspect the connections and hose for any signs of leakage and address them promptly.

With these additional tips and tricks, you can confidently adjust the firmness of your Sleep Number bed as needed, ensuring a comfortable and restful night’s sleep.

5 Things You Should Avoid When Manually Lowering Your Sleep Number Bed

1. Do Not Rush the Process: It’s important to be patient and avoid rushing when adjusting the firmness level. Hastily squeezing the valve too hard or too fast can cause too much air to escape at once, potentially making the bed too soft and necessitating a reset of the entire process.
2. Avoid Using Sharp Tools: Never use sharp objects like knives or scissors to avoid puncturing the air chamber when accessing the valve or handling any part of the bed. Stick to the recommended tools, such as a coin or screwdriver, to adjust the valve if necessary.
3. Remember to Lock the Valve: Neglecting to properly replace and secure the locking cap after making adjustments is a common mistake. Failing to lock the valve can lead to slow air leaks, changing the firmness of your bed over time and requiring frequent readjustments.
4. Avoid Ignoring the Manufacturer’s Instructions: Every Sleep Number bed has a specific set of instructions tailored to its model. Disregarding these guidelines and attempting to make adjustments based on generic advice can damage the bed or cause an uncomfortable sleeping experience.
5. Do Not Overlook Regular Maintenance Checks: After finding your perfect Sleep Number setting, it’s tempting to ignore ongoing maintenance. However, regular checks for air leaks, ensuring tight connections, and observing the bed’s response to room temperature changes are crucial for maintaining your optimal comfort level.

By avoiding these common mistakes, you can confidently adjust the firmness of your Sleep Number bed and enjoy personalized comfort for years to come. 

How Do You Manually Deflate a Sleep Number Bed?

In addition to manually adjusting the firmness of your Sleep Number bed, you may also need to manually deflate it at times. This could be for reasons such as moving the bed or storing it away. Here’s how you can manually deflate your Sleep Number bed:

1. Locate the Pump: The first step is to find the pump that inflates and deflates your Sleep Number bed. This can usually be found under the bed or in a nearby closet.
2. Unplug the Pump: Once you’ve located the pump, unplug it from the wall outlet to prevent any accidental inflation while deflating.
3. Open the Air Release Valve: The next step is locating and opening the valve on your bed. This is usually found at the head of the bed on one side. You can use a coin or screwdriver to turn the valve counter-clockwise and release the air.
4. Wait for Deflation: Depending on how firm your bed is, it may take a few minutes for all of the air to be released from the mattress. You can gently press down on the mattress to help speed up the process.
5. Fold and Store: Once the bed is completely deflated, you can fold it up and store it in a dry, cool place until you’re ready to use it again.

By following these steps, you can easily deflate your Sleep Number bed whenever needed.

How Can You Fix a Leak in Your Sleep Number Bed?

If you notice that your Sleep Number bed is losing air and constantly needs to be readjusted, it may have a leak. Here’s how you can fix a leak in your Sleep Number bed:

1. Locate the Leak: The first step is finding where the air leaks. Check the hose connections and the air chamber for any visible tears or holes.
2. Clean and Dry: Before attempting to repair the leak, ensure the area is clean and completely dry. Use a towel or cloth to absorb any moisture.
3. Use Patching Material: If you have a small tear or hole, you can use patching material specifically designed for Sleep Number beds. Follow the instructions on the patching kit and apply it over the damaged area.
4. Replace Parts if Needed: If the leak comes from a faulty hose or connector, you may need to replace these parts entirely. You can purchase replacement parts directly from Sleep Number or through other retailers.
5. Re-inflate and Check for Leaks: After making any necessary repairs or replacements, re-inflate your bed and check for any further leaks. You may need to repeat this process if the leak persists.

By regularly checking for and addressing leaks, you can maintain the firmness level you desire on your Sleep Number bed and ensure a comfortable sleep each night.

How Can You Clean and Care for Your Sleep Number Bed? 

Proper cleaning and care are essential to prolong the life of your Sleep Number bed and maintain its comfort level. Here are some tips to keep your bed in top condition:

• Use a Mattress Cover: A mattress cover can protect your Sleep Number bed from spills, stains, and dirt. Make sure to choose one specifically designed for your model of Sleep Number bed for the best fit.
• Rotate and Flip Regularly: Just like a traditional mattress, your Sleep Number bed should be rotated and flipped every few months. This helps distribute weight evenly and prevents sagging or indentations.
• Vacuum Regularly: Use a handheld vacuum or hose attachment to clean any dust or debris that may accumulate on the surface of your bed.
• Spot Clean Spills: If spills occur, make sure to spot clean them immediately with a damp cloth and mild soap. Avoid using harsh chemicals or cleaners, as they can damage the bed’s material.
• Avoid Jumping on the Bed: As tempting as it may be, avoid jumping or putting excessive weight on your Sleep Number bed. This can cause damage to the air chambers and affect the comfort level of your bed.

By following these simple cleaning and care tips, you can extend the life of your Sleep Number bed and enjoy comfortable sleep for years to come.

Conclusion

Adjusting the firmness of your Sleep Number bed manually is straightforward and empowers you to find your perfect level of comfort for a restful night’s sleep.

By carefully following the step-by-step guide on how to manually lower sleep number bed, utilizing the additional tips and tricks, and avoiding common pitfalls, you can personalize your sleeping experience to suit your preferences.

Remembering to conduct regular maintenance checks will also ensure that your bed remains at its optimum comfort level for years to come. Whether you prefer a plush, soft mattress or a firmer, more supportive surface, understanding how to manually adjust your Sleep Number bed allows for a tailored sleep experience that can significantly enhance your overall sleep quality and well-being.